**Please note when ordering Type M that it is called and ordered by the Nominal I.D. Please refer to chart below. Example : An order of 1/2" M from the drop down menu would yeild .625-OD X .028 Wall X Length.
20 FT LENGTHS WILL BE CUT INTO 5 FT SECTIONS FOR GROUND SHIPPING ( +/- 10% cut tollerance)
Manufactured to spec ASTM B88 is the Standard Specification for Seamless Copper Tube , ANSI/NSF Standard 61 Drinking Water System Components.
All of the specifications require a minimum copper plus silver content of 99.9% and phosphorus content between .015 - .040%. As indicated by the
compositional requirements, the copper tube is essentially lead free.
NSF 61 , Alloy C12200
Called by the NOM ID size Type M is used for domestic water-, service and distribution-, fire protection-, solar-, fuel and oil-, HVAC-, compressed air-, oxygen-, LPG gas-, snow melting-, steam- and vacuum-systems. Copper tubes of Type M copper tubing are typically used with wrot copper fittings. ASTM specifications are B-88.
* Please note that the straight length hard temper copper tubing listed here is called and ordered by the Nominal , ID size. Please reference this size when ordering any copper fittings or plumbing tools.
|Outside Diameter||Nominal I.D||Wall Thickness||150*F||200*F||300*F||400*F|
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: